Antennas

Manual / Guide

NanoVNA-F Menu Structure Quick Start Guide (v1.3)

Read the PDF ↗

Type
Manual / Guide
  • nanovna-f
  • menu structure
  • quick-start
  • vna

← Back to the Reference Library

NanoVNA-F Menu Structure Quick Start Guide (v1.3)

NanoVNA-F Quick start guide Home Menu DISPLAY TRACE MARKER FORMAT STIMULUS SCALE CAL CHANNEL Select a trace to modified the format, scale and so on RECALL SAVE RECALL LANGSET S11 REFLECT S21 THROUGH CLOSE SAVE TOUCHCAL < BACK < BACK 1. Press the middle button of the level or tap the screen to call out the home menu. 2. Move the level up and down keys to select the column, press the middle button to enter or directly click the corresponding column to enter. RECALL 0 TRACE 0 OFF LOGMAG TRACE 1 SINGLE < BACK SCALE/DIV PHASE TRACE 2 REFERENCE POSITION ELECTRICAL DELAY DELAY TRACE 3 SMITH < BACK < BACK SWR LINEAR > MORE REAL < BACK IMAG < BACK SAVE 0 ENGLISH POLAR SAVE 1 RECALL 1 SELECT MARKER MARKER 1 CHINESE RESISTANCE SAVE 2 RECALL 2 > START MARKER 2 < BACK REACTANCE SAVE 3 RECALL 3 > STOP MARKER 3 SAVE 4 RECALL 4 > CENTER MARKER 4 < BACK < BACK > SPAN ALL OFF < BACK < BACK NUM Input < BACK START NanoVNA-F Handheld Vector Network Analyzer deepelec.aliexpress.com github.com/flyoob/NanoVNA-F groups.io/g/nanovna-f Facebook Group : NanoVNA-F Hangzhou Minghong Electronic Technology Co., Ltd. WWW.DEEPELEC.COM START 50.000 kHz STOP 1000.000 000 MHz If calibration is available, the CAL status will be displayed. Otherwise, it is hidden. C * is in the state where an unsaved calibration is applied (it disappears from memory when the power is turned off). C0 to C4 Indicates that the saved calibration values are applied to one of the save locations. Saved or Unsaved will change when calibration data is properly saved. The letters below C indicate that the following error terms have been applied. D: Directivity, R: Reflection Tracking, S: Source Match, T: Transmission Tracking and X: Isolation STOP Tap to exit input CENTER NUM Input SPAN CW FREQ PAUSE SWEEP 5 < BACK CALIBRATE OPEN +1 -1 RESET SHORT SAVE 0 CORRECT LOAD SAVE 1 < BACK ISOLN SAVE 2 THRU SAVE 3 Charge Discharge DONE SAVE 4 < BACK < BACK Status Red Blue charging full discharging low battery Blink ON OFF OFF OFF OFF ON Blink Done Keyboard Mode 000 050 000 Deepelec Store 7 8 9 G 4 5 6 M 1 2 3 k 0 . ← x1 Backspace & Exit Done 4.0V Cx D R S T X By: BH5HNU Date: 5 Jan 2020 Release: 1.3